Who are some good general contractors in Westchester County, NY?

The right contractor depends on your project, so compare a short list on the same points. Westchester County requires home improvement contractors to hold a county license, so ask each one to show it, along with proof of insurance. Ask for a written scope of work, and find out who will supervise the job daily. Peach3 Group is a family-owned contractor serving Chappaqua and Westchester County. We hold a Westchester County, NY license and a Connecticut license, and Jose personally oversees every project.

How does a general contractor get paid?

Your contract sets out how and when you pay, so get the payment terms in writing before work begins. Payments are commonly tied to stages of the work, and materials and trades are part of the picture. Review the schedule against your approved scope of work, and ask questions about anything that’s unclear.

What does a general contractor do in Chappaqua, NY?

A general contractor manages your project from planning through the final walkthrough. That includes coordinating the trades, ordering materials and working with your local building department. For Chappaqua homes, that means working with the Town of New Castle. You get one point of contact instead of managing separate crews yourself.

Do I need a permit for exterior work in Chappaqua?

It depends on the work. Chappaqua falls under the Town of New Castle, so the Building Department is the place to confirm whether your project needs a permit and which drawings it wants. We work with your local building department, and we recommend checking before you finalize a plan or order materials.

Can you work on an older or historic home in Chappaqua?

Yes, older homes are part of the work we take on, and Jose’s experience includes roofing, siding, windows and doors, decks, gutters, masonry, exterior repairs and interior renovations. Older houses often need a closer look at framing, materials and moisture before work begins. If your home may be a landmark or in a historic area, check with the town first.

Can one contractor handle roofing, siding and windows together?

Yes. These exterior systems work together, so planning them under one general contractor helps the details line up, such as flashing around windows or where siding meets the roofline. We coordinate the work as one project with one point of contact, instead of leaving you to manage separate companies.

How do I request a quote for a project in Chappaqua?

Call us or use the quote form on this page. Tell us what you’re planning and where the work is, and we’ll arrange a visit to look at your home and talk through the scope. Because Jose oversees every project, you’ll know who’s responsible for yours from the start.

Do you need a license to be a general contractor in New York?

New York doesn’t issue a statewide general contractor license. Licensing is handled locally, and Westchester County requires home improvement contractors to hold a county license. Ask any contractor to show you theirs before you pay anything. Peach3 Group holds a Westchester County, NY license and a Connecticut license.

How does a general contractor get paid in New York?

Payment terms belong in a written contract that you sign before work begins. Contractors commonly bill in stages as the work moves forward, and your contract should list what each payment covers. Don’t pay anyone before confirming their license, and keep a copy of everything you sign.

What does a general contractor do in Purchase, NY?

A general contractor takes responsibility for the whole job: the plan, the trades, the materials and the permits. In Purchase, that includes working with the Harrison Building Department. You talk to one contractor instead of coordinating roofers, carpenters and masons yourself, and the work stays organized from start to finish.

Do I need a permit to replace windows or a roof in Purchase?

Harrison’s Building Department has a short-form residential permit application for window, exterior door and roof work, so check with them before you start. Larger projects, such as decks and additions, use a longer application. We work with your local building department so the paperwork matches the plan.

Can you build or repair a deck in Purchase?

Yes. Deck Repair & Builder is one of our core services, and we start with the framing, footings and railings. Harrison’s Building Department reviews deck permit applications, and it may ask for a final as-built survey. We work with the department so your deck plan and paperwork line up.

Can one contractor handle roofing, siding and windows at once?

Yes, and it often makes sense. A roof change can affect the gutters, and new windows affect the siding and trim around them. With one general contractor planning those pieces together, the details meet cleanly and you only have one person to call about the whole project.

How do I get a quote for general contractor work in Purchase?

Call us or use the quote form on this page, and tell us what you want done at your Purchase home. We’ll set up a visit to look at the work and talk through the scope. Jose oversees every project, so you’ll know who is responsible from the first conversation.

How can I check that a contractor is licensed in Pelham Manor?

Westchester County requires home improvement contractors to hold a county license, and the county publishes a list of licensed contractors you can check. Ask to see the license, confirm the insurance and get the contract in writing. Peach3 Group holds a Westchester County, NY license and a Connecticut license.

Do I need a permit to replace siding or windows in Pelham Manor?

The village lists window replacement and exterior siding replacement as examples of work that needs a building permit. It lists fixing a broken window or broken siding as work that doesn’t. If you’re unsure which applies, ask the village before you start. We work with your local building department on permits.

Can I build a deck in Pelham Manor?

Installing a deck is listed by the village as work that needs a building permit, and zoning rules cover setbacks and accessory structures. We build and repair decks, and we work with your local building department so the plan, the paperwork and the site work line up.

Which building department handles permits in Pelham Manor?

Pelham Manor is its own village, so permits go through the Village of Pelham Manor’s Building & Zoning department, not the Village of Pelham. Both villages are part of the Town of Pelham, which is why it’s worth confirming where your home sits before you start planning your project.

How do I choose a good general contractor in Pelham Manor?

Compare two or three contractors on the same checklist: license, insurance, a written scope and who supervises the work. Reviews help, but also ask for specifics about the kind of work you’re planning. At Peach3 Group, Jose personally oversees every project, so you know who answers for the work.

Can one contractor handle roofing, siding, windows and gutters?

Yes. Roof edges, gutters, siding and window trim all meet in the same few inches of your house, and a change to one affects the others. Planning them under one general contractor helps the details line up, and you have a single person to call about the whole project.

How do I request a quote for work in Pelham Manor?

Call us or use the quote form on this page, and tell us about your home and the work you’re considering. We’ll set up a visit, look at what’s there and talk through the scope. Jose oversees every project, so you’ll know who is responsible for the result.

Does a general contractor need a license in New York?

Not at the state level, since New York has no statewide general contractor license. Licensing is local, though, and Westchester County requires home improvement contractors to hold a county license. You can check a contractor against the county’s published list before hiring. Peach3 Group holds a Westchester County, NY license and a Connecticut license.

How do I find a good residential general contractor in Pelham?

Start with referrals and reviews, then compare contractors on the same questions: licensing, insurance, a written scope of work and who runs the job. Jose personally oversees every Peach3 Group project, which means you’ll know who is responsible for yours from the first visit to the final walkthrough.

Do I need a permit for a roof or windows in Pelham?

The Village of Pelham lists replacement roofs and window installation or replacement among projects that need a permit application. Because that list isn’t comprehensive, call the Building Department before you start. We work with your local building department so the plan and the paperwork stay in step.

Is a new deck an addition in Pelham?

On the Village of Pelham’s permit list, additions include wooden decks, so a new deck is something to raise with the Building Department early. For a repair, ask the department whether anything is needed before work starts. We build and repair decks, and we work with the department on the paperwork.

Does Pelham have different rules from Pelham Manor?

Yes. Pelham and Pelham Manor are separate villages within the Town of Pelham, and each village is responsible for the properties in its own area. That means a different building department for each, so confirm which village your home is in before you plan your project.

Can you handle a home remodel in Pelham from design to finish?

We coordinate design, permitting and construction for you, working with an architect, a licensed plumber and a licensed electrician when your project calls for them. Jose oversees the work on site, and you deal with one contractor from the first conversation to the final walkthrough.

How do I get a quote from a general contractor in Pelham?

Call us or use the quote form on this page, and describe the work and where it is in Pelham. We’ll arrange a visit to see the home and talk through the scope. Because Jose oversees every project, you’ll be speaking with the person who answers for the result.

What are the three types of gutters?

The three styles people mention most are K-Style, half-round and box. K-Style has a flat back and a decorative front, half-round is a smooth curved channel, and box gutters are square or rectangular. Aluminum and copper are materials, which is a separate choice. Your home’s style and roofline help decide the best fit.

Can gutters be repaired instead of replaced?

Often, yes. If the problem is limited to a leaking seam, a few loose hangers or one damaged section, repair can solve it. If problems are spread across the system or keep returning, replacement usually makes more sense. A site visit shows which one your gutters need, and we’ll explain the difference before any work begins.

Should I replace 20-year-old gutters?

Age alone doesn’t decide it. Gutters that are still straight, sealed and draining well may have life left. Rust, cracks, repeated leaks or sections pulling away from the house are signs it’s time to consider replacement. Have us take a look, and we’ll tell you honestly whether repair or replacement makes sense for your home.

How much does gutter installation cost in New Rochelle?

It depends on the length of your roofline, the material and style, the roof’s height and complexity, and whether old gutters need to come off first. A single repair costs far less than a full new system, for example. The most accurate price comes from a site visit. Request a quote, and Peach3 Group will arrange one.

How much should a gutter repair cost?

Repair costs depend on what’s wrong and how much of the system is affected. Re-securing a few hangers is a different job than fixing a long sagging run, and replacing one damaged section is different again. Fascia condition can also change the scope. We’ll look at your gutters in person and explain what’s needed.

Do I need gutter guards for my home?

Not every home does. Guards can help if trees overhang your roof and debris builds up quickly. But no guard removes maintenance entirely, and some designs handle heavy rain better than others. We’ll look at your roofline and trees, talk through the pros and cons, and help you decide whether guards make sense.

How much does it cost to repair a deck in New Rochelle?

It depends on the type of work, the size of the deck, the material and the condition of the structure. Replacing a few boards costs far less than rebuilding rotted framing, for example. The most accurate price comes from a site visit and an estimate. Request a quote, and Peach3 Group will arrange a visit.

Is deck repair covered by homeowners insurance?

It depends on your policy and what caused the damage. Insurers often treat sudden damage differently from wear, rot or lack of maintenance, so coverage varies. We can’t tell you what your insurer will cover, so check with your insurance company or agent before work begins. We’re happy to explain what we find during our site visit.

Is it better to repair or replace a deck?

It depends on how far the damage has spread. Surface wear, a few bad boards or a tired finish can usually be repaired. Damage to the framing, posts or the connection to your house may call for bigger repairs or a replacement. A site visit shows which applies, and we explain why before recommending anything.

Can a handyman rebuild a deck?

A deck is a load-bearing structure, so rebuilding one involves framing, footings and sometimes a permit. Smaller fixes, like swapping a board, can be simple. For structural work, ask whether the contractor is licensed and insured and who handles permits. At Peach3 Group, we’re licensed and insured, and we work with the building department on permits.

Is composite or wood decking better for my home?

Neither is better for every home. Composite asks for less upkeep, while wood gives you a natural look and needs regular care. Your home’s style, your budget and how much maintenance you want to take on decide it. We’re happy to walk you through samples and options for your deck.

Do I need a permit to repair or build a deck in New Rochelle?

It can depend on the scope of the work, since a new deck or structural change is different from replacing a few boards. Your local building department can tell you what applies to your property. If your project needs a permit, we work with the building department as part of the job.

How long does a deck project take?

It depends on the type and size of the work. Swapping a few boards or refinishing is much quicker than repairing framing or building a new deck, and weather can affect scheduling. We’ll give you a realistic timeline during your estimate instead of a one-size-fits-all number.

Masonry Contractor

Request a free call now!

Our Services

We promise superior craftsmanship, honest guidance, and durable results on every project — never compromising on quality

Masonry Contractor in New Rochelle, NY

Stone, brick and concrete work built to handle Westchester winters.

Peach3 Group is a family-owned masonry contractor in New Rochelle, NY, serving homeowners across Westchester County and Fairfield County, CT. We build and repair patios, walkways, steps, retaining walls, stonework and brick, and the owner oversees every project.

Masonry takes a beating in this climate. Water gets into stone and mortar, freezes and expands, and a small crack can grow into a failing wall or an uneven step over time. Whether you’re planning a new flagstone patio or fixing crumbling brick joints, we start with a close look at your property and a clear plan.

Ready to talk it through? Call +1 (914) 451-8300 or request a quote, and we’ll set up a time to see your project in person.

Request a quote

+1 (914) 451-8300

Finished stone patio and walkway in New Rochelle, NY

Brick restoration detail on a Westchester home

What Does a Masonry Contractor Do?

A masonry contractor builds, repairs and restores structures made from brick, stone and concrete. You’ll also hear them called masons, stonemasons or bricklayers.

In practice, that covers a lot of the work around your home: patios and walkways, steps and stoops, retaining and garden walls, stone veneer, brick repair and concrete surfaces. Each project is built from individual units, such as bricks, stones or pavers, set by hand on a solid base or bonded with mortar.

What are the three types of masonry?

The three types people mention most are brick, stone and concrete block. Brick shows up in repairs, restoration and walls. Stone is used for patios, walkways, steps, veneer and fieldstone walls. Concrete and block handle sturdy, flat or structural surfaces. Most home projects use one of these materials or a mix of them.

Our Masonry Services in New Rochelle, NY

Every project starts with the same question: what does your home actually need? Here are the masonry services we offer.

Stone, Bluestone & Paver Patios

A patio is one of the most popular masonry projects because it turns unused yard into a place you’ll actually spend time. We build stone, bluestone and paver patios sized and shaped to fit your house and your yard.

The right material depends on your home’s style and how you plan to use the space. A natural stone patio suits a Colonial or Tudor home with traditional landscaping, while pavers work well for a clean, uniform look and can be repaired one unit at a time.

For example, if you want a dining area just off the back door, we’d plan the patio around your table and chairs, then check how water will drain away from the house. If you’re also planning a deck, we can design the two to work together.

Paver patio with a seating area in New Rochelle, NY

Flagstone Patios & Walkways

Flagstone is natural, flat stone cut in irregular shapes, so no two flagstone surfaces look exactly alike. We use it for patios and walkways where you want a natural, relaxed look.

It’s a good fit for garden paths, front walks and patios that blend into plantings. Because the stones vary in thickness and shape, the layout and base matter. A well-prepared base helps keep the surface level and reduces shifting and uneven spots.

We also build walkways in stone or pavers, from a simple garden path to a front walk that leads to your steps. That front walk is often the first thing guests see, so we pay close attention to how the walkway, steps and landscaping fit together.

Flagstone walkway leading to a front entry in Westchester County

Stone Steps & Stoops

Steps and stoops take daily wear and a lot of weather. We build new stone and masonry steps, and we repair steps that are cracked, loose or uneven.

Loose or settling steps aren’t just an eyesore. They can be a safety problem, and water that gets underneath can make things worse each winter.

Picture a stoop where the top slab has pulled away from the house, leaving a gap where water collects. We look at whether it can be reset and repaired or needs to be rebuilt, and we explain the difference before any work begins.

Stone front steps and stoop on a New Rochelle home

Retaining Walls, Stone Walls & Wall Coping

Retaining walls hold back soil on sloped yards, while stone and fieldstone walls define space and add character. We build both, and we repair walls that lean, crack or bulge.

Drainage is what keeps a retaining wall standing. Water pressure behind a wall is a common reason walls fail, so we plan drainage along with the wall itself. Directing roof water away from your walls with well-placed gutters helps too.

Wall coping is the cap that sits on top of a wall. It sheds water, keeps moisture from getting in from above and gives the wall a finished look.

A fieldstone wall along a garden bed that has started to lean usually points to a base or drainage problem. That’s why we look at what’s behind the wall, not just the wall itself.

Fieldstone retaining wall with stone coping in Westchester County

Stonework, Stone Veneer & Decorative Stone

Stonework adds texture and a lasting finish to your home’s exterior. We install natural stone and stone veneer on walls, entries and other features, and we use decorative stone and cobblestone for accents.

Stone veneer gives you the look of full stone in a thinner, lighter form. It’s a popular way to refresh an entry, a porch base or a feature wall. Cobblestone and decorative stone work well as borders, edging and small details that tie the rest of the masonry together. If you’re updating your siding too, veneer can be planned alongside it.

Stone veneer on a home entry in New Rochelle, NY

Brick Repair, Brick Restoration & Tuck Pointing

Brick is durable, but the mortar between the bricks usually wears out first. Brick repair, restoration and tuck pointing all aim to keep water out of your walls. Here’s how they differ:

Tuck pointing: removing worn mortar from the joints and filling them with fresh mortar.
Brick repair: replacing cracked or damaged bricks and fixing the area around them.
Brick restoration: the broader job. It can include tuck pointing, replacing damaged bricks and cleaning to bring a surface back to good condition.

Older brick often needs mortar that matches the original, because mortar that’s too hard can put stress on softer brick. Matching the mortar to your wall matters as much as the repair itself.

Crumbling mortar, gaps between bricks or bricks with flaking faces are all signs it’s time to have a mason take a look. Catching it early usually keeps the repair small.

Brick wall before and after tuck pointing

Cement & Concrete Work

People often say “cement work,” but the material you’re actually working with is concrete, which is cement mixed with sand, gravel and water. We handle concrete work as part of your masonry project, including steps, flatwork and surfaces that tie into a patio or walkway.

Concrete is strong and practical, and it pairs well with stone or brick for a finished look. When you need a concrete contractor for a project that also involves stone or brick, working with one team keeps everything consistent.

Flagstone, Bluestone or Pavers: Which Patio Material Is Right for Your Home?

There’s no single best material. Flagstone has a natural, irregular look, bluestone is a dense natural stone often cut into clean, flat shapes, and pavers offer a uniform pattern and are easy to repair. The best choice depends on your home’s style, your budget and how you’ll use the space.

Material	Look	Works well for	Things to consider
Flagstone	Natural, irregular shapes with color variation	Garden paths, relaxed patios, traditional landscapes	Uneven edges need careful layout and a solid base
Bluestone	Clean, flat stone in blue-gray tones	Patios, steps and entries with a tidier look	Natural stone, so color and surface vary from piece to piece
Pavers	Uniform units in set patterns and colors	Patios and walkways, traditional or modern	A well-built base and edges keep units locked in place

A Tudor home with stone accents might call for flagstone or bluestone to echo the stonework already there, while a newer home with clean lines may suit pavers. Not sure which fits? Tell us how you use your yard, and we’ll talk through the options.

Flagstone, bluestone and paver patio material samples

How Much Does a Masonry Contractor Cost in New Rochelle?

The cost depends on the type of work, the size of the project and the materials you choose, so there’s no single price. Two patios of the same size can cost very different amounts depending on the stone, the layout and the conditions on your site. The most accurate way to price your project is a site visit and an estimate.

Residential masonry costs in New Rochelle usually come down to these factors:

Type of work: a repair versus a brand-new build.
Size and shape: a small stoop is a different job than a wraparound patio.
Material: natural stone, pavers, brick or concrete.
What’s there now: whether old work has to be removed first.
Site conditions: slope, drainage and how easily crews can reach the area.
Design details: patterns, curves, steps, walls and edging.
Permits: where your town requires one for the project.

Want a number for your project? Request a quote and we’ll arrange a visit.

Common Masonry Problems by Home Type: Colonial, Tudor and Victorian Homes

Every home style has its own masonry quirks. Knowing what to look for helps you catch problems early.

Colonial homes

Colonial homes often have brick or stone steps, front walks and brick walls that are exposed to rain and winter freezing. Typical issues include worn mortar joints, loose or settling steps and cracked walkways. Brick repair, tuck pointing and rebuilt steps handle most of these.

Tudor homes

Tudor-style homes are known for decorative brick and stone and detailed entries. Because the masonry is part of the design, repairs need to match the original color, texture and joint style. Common issues include mortar wear, loosened stonework and weathered accents. Stonework repair, tuck pointing and brick restoration keep the look consistent.

Victorian homes

Victorian homes often feature ornate details, decorative brickwork, stone bases and front steps. The masonry tends to be older and more intricate, so careful matching matters. Typical issues include crumbling mortar, flaking brick faces and worn steps. Brick restoration and tuck pointing are common fixes.

Mid-century and newer homes

Newer homes more often have patios, walkways and retaining walls, especially on sloped lots. Common issues include uneven pavers, settling walkways and leaning walls. Rebuilding the base, resetting pavers or rebuilding a wall with better drainage often solves them.

Not sure which category your home falls into? That’s fine. We’ll look at it together during your visit.

Colonial home with brick and stone details in Westchester County

How Does Our Masonry Process Work?

Our process is simple: you tell us what you need, we visit and assess, you get an estimate, we do the work, and we clean up. Here’s what each step looks like.

Cleanup and follow-through. We clean up the work area and make sure you’re comfortable with the finished work.

Call or request a quote. Tell us what you’re seeing or what you’d like built.

Site visit and assessment. We look at the area, take measurements and talk through your options.

Estimate and plan. We explain the scope, materials and approach so you know what to expect. If your project needs a permit, we work with your local building department.

The work. Our crew builds or repairs your project, with the owner overseeing the job.

Cleanup and follow-through. We clean up the work area and make sure you’re comfortable with the finished work.

Why Choose Peach3 Group as Your Masonry Contractor in New Rochelle?

Masonry is heavy, permanent work, so it pays to hire people who’ll do it right the first time. Here’s what you can expect from us.

Family-owned and based in New Rochelle. We’re right here in town, serving homeowners across Westchester County and Fairfield County, CT.
Owner-led projects. Jose, our owner and lead contractor, personally oversees every project. We limit our volume on purpose so quality is never rushed.
Hands-on masonry experience. Jose has hands-on experience with masonry and pavers, along with exterior repairs, roofing, siding, windows, doors and decks.
Licensed and insured in NY and CT. We’re fully licensed and insured in Westchester County, NY and Fairfield County, CT, so you’re working with a licensed masonry contractor.
One coordinated process. We coordinate design, permitting and construction for you, working with an architect when your project calls for one.
Local experience. We know how to work with local building departments and architectural review boards.

Masonry is often one piece of a bigger exterior project. If you’re also planning roofing, siding or other exterior work, we can coordinate it all.

Masonry Contractor Near You: Areas We Serve

Peach3 Group is based in New Rochelle and provides masonry services across Westchester County, NY and nearby Fairfield County, CT, including:

Westchester County, NY

New Rochelle
Pelham
Pelham Manor
Larchmont
Mamaroneck
Scarsdale
Eastchester
Bronxville
Harrison
Rye
Purchase
Armonk
Chappaqua

Fairfield County, CT

Masonry FAQs

It depends on the type of work, the size of the project and the materials. A small brick repair costs far less than a new stone patio, for example. The most accurate price comes from a site visit. Request a quote, and Peach3 Group will arrange one.

A masonry contractor builds and repairs structures made of brick, stone and concrete, such as patios, walkways, steps and retaining walls. You may also hear them called masons, stonemasons or bricklayers. Peach3 Group handles these projects for homes in New Rochelle and nearby towns.

The three types people mention most are brick, stone and concrete block. Brick masonry covers walls, steps and repairs. Stone masonry covers patios, walkways, veneer and fieldstone walls. Concrete and block are used for sturdy, flat or structural surfaces. Most home projects use one or a mix of these.

Tuck pointing means removing worn mortar from the joints and filling them with fresh mortar. Brick restoration is the wider job, and it can include tuck pointing, replacing damaged bricks and cleaning the surface. If only the mortar is failing, tuck pointing may be enough. A site visit shows which one your wall needs.

Neither is better for every home. A flagstone patio has a natural, irregular look and suits relaxed or traditional settings. Pavers give a uniform pattern, and individual units can be replaced if needed. Your home’s style, your budget and how you use the space decide it. We’re happy to talk through the options.

It can depend on the wall’s height, its purpose and local rules, so check before you build. Your local building department can tell you what applies to your property. If your project needs a permit, we work with the building department as part of the job.

It depends on the type and size of the work. A small repair can be much quicker than a full patio or retaining wall, and weather can affect scheduling. We’ll give you a realistic timeline during your estimate instead of a one-size-fits-all number.

Ready to Start Your Masonry Project in New Rochelle?

Whether you’re planning a new flagstone patio or fixing worn brick, Peach3 Group can help. Talk with a masonry contractor in New Rochelle who oversees the work personally. Call +1 (914) 451-8300 or request a quote, and we’ll arrange a time to see your project.